European-made tool maker Unior has released a big cache of new bicycle repair tools suitable for professional and home mechanics – from the BMX-specific kits we previewed last summer, to a new Master Wheel Building tool kit, and lots of smaller bike tools in between. Unior is known throughout Europe for more than 100 years of manufacturing hand tools in Slovenia, but their bike-specific tool family is quite a bit younger, so there’s always room to fill out the lineup.

First up are a couple of BMX kits inspired by the popularity of Unior’s Home Kit, Pro Kit & Master Kit comprehensive tool kits. With a boom in BMX racing and the majority of BMXers servicing their own bikes, there was a gap in high-quality all-in-one toolkits to fix everything on the 20″ singlespeed race bike.

The 830€ BMX Kit sits at the high-end of that spectrum, with its own sturdy, lockable French waterproof tool case and 43 carefully chosen, Slovenian-made Unior BMX bike tools securely stored inside in laser-cut foam trays.

Every piece is a professional mechanic level tool, built to last a lifetime of wrenching.

On the more affordable end of the spectrum is the 236€ BMX Roll Set. Intended more as a privateer race day setup, you still get 16 core bike tools like hexes, pedal wrench, master-link pliers, a chain tool & cable cutters.

And it all comes in a weather-resistant tool roll with extra slots for your other preferred race day tools, small parts pockets, and big alloy eyelets designed to hang off a car seat headrest or a fence in the race pits. (There’s also a similar, non-BMX Tool Wrap Kit, for those who ride bigger wheels & gears.)

Beyond these comprehensive bike-specific kits, Unior also has a couple of new task-specific kits…

First up is the 350€ Master Wheel Building Kit, a comprehensive kit suitable for a professional wheelbuilding workshop, or for the home tinkerer who wants to build their own wheels.

Inside Unior’s 2-level plastic carrying case are 19 wheel-specific tools secured in pre-cut foam inserts. You get nipple drivers, nipple insertion tools, nipple speed bits, socket driver, aero spoke holder, straight-pull spoke pliers, a spoke measuring tool, and various spoke wrenches to fit all modern-sized nipples.

For your modern BBs, a new 220€ Bottom Bracket Bearing Press Kit is probably more suited for bike shops, or the cyclist with n+1 bikes to maintain.

You get a single-level plastic case with an easy-to-use small-scale quick-release sealed bearing press that includes drifts to fit most modern BB30 & PressFit bottom bracket standards, like: SRAM DUB, BB30, BB86/BB92.

On the smaller side of things…

Unior just completely overhauled their Pro Truing Stand last summer and added those nice colorful spoke wrenches too. Now, they’ve made a nice wooden base for the new stand to keep your small parts from rolling away as well. Nobody likes to lose a nipple. We snuck a peek at the 150€ bolt-on beech base at Eurobike, but now your shop can add it to your 410€ professional truing stand to protect your worktop and make it easier to move around the shop for wheel builds & truing work.

Then, there’s this new 10€ Flare Nut Wrench that provides a solid 7mm or 8mm grip on your brake hose nuts. And with a 1/4″ square hole in the center, you can pop it into many standard torque wrenches to actually install new brake lines to the proper manufacturer-recommended setting.

Flush Cutters look just like a regular set of angled end nips, but these 31€ cutters are finely-ground with a flat side so that they give a perfectly flush cut to zip ties or other plastic bits. No more sharp edges to get caught on. They aren’t as hard as regular cutting nippers, so they are “for plastic only” but a perfect way to add a pro finishing touch to your bike builds.

There are always more Bottom Bracket sockets to add as BB standards continue to expand so rapidly, it’s silly we even still use the word standard. For 50€ you can pick up either the new E13 or Hope BB Socket in red anodized, precision-machined aluminum.

Lastly, for shops working on 4th generation Bosch ebikes, the motor mounts use a special T40 Plus torx interface, not the standard tapered torx… because standards. /s Anyway, Unior has your back and an 11€ Screwdriver Socket with 1/2″ TX Plus T40 profile so you can install and remove the new motors without rounding out those weird bolts.

All of the new Unior Bike Tools are available now, in stock both in Europe & North America, ready to ship out from your local distributor.

Cory Benson is the EU Tech Editor of Bikerumor.com.

Cory has been writing about mountain bikes, enduro, cyclocross, all-road, gravel bikes & bikepacking for over 25 years, even before the industry gave some these names. Prior to Bikerumor, Cory was a practicing Architect specializing in environmental sustainability, has designed bike shops & bike components and worked as a bike shop mechanic.

Based in the Czech Republic for 15+ years, he is a technical mountain biker, adventurous gravel rider, short & medium-haul bikepacker. Cory travels extensively across Europe riding bikes, meeting with key European product developers, industry experts & tastemakers for an in-depth review of what’s new, and what’s coming next.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

5DEV, the bicycle components arm of engineering company, 5th Axis, has released new Titanium Chainrings in the form of the 3-Bolt Direct Mount offering. Available…

With a fresh round of funding and its eye set on growth, European used eBike platform Upway is cracking into the U.S. market.

YT has released a new Capra Core 3 Model for 2023, updated with a RockShox Ultimate level suspension package, electronic shifting from a SRAM GX…

The color looks a little more like a bow on a gift box than the company’s usual race red. It drops today on every size of woom ORIGINAL.

From Cycles Devinci: “Get ready to experience Quebec’s Eastern Townships on two wheels! Join Devinci Global Racing athletes as they explore the region’s diverse terrain, from the…

Want a “light cycle?” Then get a Funn TRON stem, with multiple length options weighing between 126-152 grams.

Rab aims to prepare riders for all eventualities with an adventure bike-specific rain jacket, bib, cargo shorts, liner shorts, and more.

Chris Akrigg has always been one of our favorite riders to watch. Seamlessly blending trials, MTB, BMX, and other influences, he often makes the impossible…

Sign up to receive BikeRumor content direct to your inbox.

Sign up to receive BikeRumor content direct to your inbox.